====== ETA 2894-2 ====== {{wst>image_cr|ETA|2894-2}} The **ETA 2894-2** is an automatic [[chronograph]] calibre by [[ETA]]. It was introduced in [[1996]] and remains in production [[as of 2019]]. ===== Overview ===== The 2894 is unusual in that it is not derived from the [[Valjoux 7750]], which is the basis for most of ETA's chronograph movements. Instead, like the [[ETA 2094]], the 2894-2 is a modular design pairing a traditional base with a self-contained chronograph module. In this case, the 2894-2 is based on the low-profile [[ETA 2892-2]]. The 2894 is somewhat smaller than the 7750 family, measuring 12½ [[ligne]]s (28.00 mm) in diameter and 6.10 mm high compared to the typical 13¼ [[ligne]]s (30.00 mm) diameter and 7.90 mm height of the 7750 family. Unlike the Valjoux, which can be serviced by a watchmaker, the 2894-2 chronograph module is only serviceable by the factory. Repairs typically consist of replacing the module entirely. Mechanical movement with [[automatic]] winding, ball-bearing rotor, [[hacking seconds]], [[small second]] at the "3", [[chronograph]], date display at the "4" with [[quickset]] feature. It is sold by [[TAG Heuer]] as their "Calibre 17". **Description:** * [[Self-winding]] movement * [[Chronograph]] with [[cam switching]] * [[Incabloc]] [[shock protection]] * [[Escapement]] Stone lever * [[Yoke winding system]] * ETACHRON regulation system **Functions:** * Hours, Minutes * [[Small seconds]] at the "3" * Date with [[quickset]] feature * [[Hacking seconds]] * [[Chronograph]] 60-seconds, 30-minutes and 12-hours counter **Data:** * 11½ [[ligne]]s * D 28.6 mm, H 6.1 mm * 37 [[jewels]] * 28,800 A/h * Power reserve 38h **Production period:** * Since [[1996]] {{tag>Movements Automatic_movements Chronograph_movements ETA_2890_calibres Automatic_chronograph_movements Column_wheel_chronograph_movements}}