Table of Contents
Calibre 630 was a compact quartz watch movement with a mechanical chronograph developed by Jaeger-LeCoultre and also used by IWC.
Introduced in 1987, Calibre 630 was the first member in the Jaeger-LeCoultre Mechaquartz family. It was a complicated movement, with 25 jewels. At the time, it was advertised as a revolutionary thin chronograph, measuring just 23.30 mm diameter and 3.70 mm thick. This made it 1/3 the volume of most contemporary chronograph movements and 40% smaller than the smallest equivalent movement on the market.
There are two motors in the calibre
- One powers the main timekeeping hands at a frequency of 1 Hz
- A second powers the mechanical chronograph at 4 Hz
Since the chronograph is mechanical, it has the same feel as a conventional chronograph movement, including mechanical zero reset. Yet the Mechaquartz was much more compact than a conventional automatic chronograph movement.
Calibre 630 differed from Calibre 631 in that it included a moon phase indicator.
Note There is conflicting information on the quartz frequency, with some sources claiming dual 1 KHz and 4 KHz crystals and others claiming 32 KHz. It is likely this confusion comes from the 1 and 4 Hz motors.
Calibre 630 was used in chronograph watches in the 1980's and 1990's, though not as widely as Calibre 631
- Quartz movement with mechanical chronograph
- Hour, minute hands
- Small seconds at 6 00
- Moon phase indicator
- Chronograph with 30 minute and 12 hour subdials at 9 00 and 3 00, respectively
- H 3.70 mm
- D 23.30 mm
- 25 jewels
- 233 components
- Frequency 32 KHz