Watch Wiki

The Best Watches and Watch Brands

User Tools

Site Tools


ultra-thin

Ultra-thin

One of the most difficult accomplishments in horology is producing an ultra-thin watch movement.

Background

As with other notable accomplishments, creating an ultra-thin watch movement typically involves serious engineering to overcome difficulties. Perhaps the most difficult aspect of thinness are the questions of durability and structural rigidity. It is critical that movement plates be stiff enough to resist flexing or warping over time, since gears must be precisely located. This is especially true with an ultra-thin movement since these have similarly-thin gears that could un-mesh if they come out of alignment.

Most ultra-thin movements include simpler bridge and cock setups, often with one bridge doing the task of two. This presents serious engineering challenges when combined with the necessity to move gears both vertically and horizontally to make space.

One potential solution to these problems is to combine the movement and case into a single unit. This causes issues with servicing but typically leads to greater structural stability.

Ultra-Thin Movements

Traditional movements are measured in two dimensions Diameter and height or thickness. Although it would be tempting to trade thickness for width, this is not practical Some components (notably the balance and escapement and barrel) must have a minimal thickness to be functional. These create a minimum thickness that can be achieved. This is especially true for ultra-thin tourbillons and automatic movements since these components take up quite a bit of room in a movement.

Smallest Volume

Threshold 300 mm³

  • Watch movement Citizen G720 (2002) 30 mm² surface area, 73 mm³ volume (5.0 mm x 6.0 mm x 2.5 mm)
  • JLC 101 228 mm³

Quartz

Threshold 1.5 mm

Hand-Winding

Automatic

Micro-Rotor

Threshold 2.4 mm

Central Rotor

Date

Threshold 3.3 mm

Full Calendar

Threshold 6 mm

Perpetual Calendar

Threshold 6 mm

Chronograph

Threshold 5 mm

Automatic Chronograph

Threshold 6 mm

Minute Repeater

Threshold 4 mm

Tourbillon

Threshold 3.5 mm

Automatic Tourbillon

Ultra-Thin Watches

Quartz Integrated Watch

Threshold 2 mm

Mechanical Integrated Watch

Threshold 4 mm

ultra-thin.txt · Last modified: 03.07.2022 15:38 by 127.0.0.1

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki

© Watch Wiki. All texts are protected by copyright. The respective copyright holders are the signatories of the contributions. For details see Impressum. Regarding objections and complaints (copyright and other rights) also see there. Impressum | Privacy Policy | Copyright | About Watch Wiki