IWC has been transitioning to in-house movements since 2000, enhancing the reputation and technical features of their watches. One of the final areas to address was the need for a time-only movement, and this was addressed with Cal. 82110, introduced in 2017. This new calibre family is based on the ETA 2892-A2 architecture but all components are said to be produced in-house. This is in contrast to predecessors in the Cal. 30000 family which used an ETA ebauches and others which were made from “kits” produced by ETA and Sellita. In 2019, IWC introduced Cal. 32110, a new compact movement based on the Cal. 82000 family.
Like the Cal. 82000 family, Cal. 32110 uses the basic architecture of the ETA 2892/A2, a movement long used by IWC as their Cal. 30110. Like the Cal. 82000 family, Cal. 32110 has components made of silicon and ceramic for longevity. Specifically, the escape wheel and pallet lever are constructed of silicon. Although it features bi-directional pawl winding, it is a “push-pull” design like the Seiko magic lever system rather than IWC's Pellaton system. This same arrangement was used in IWC's Cal. 69000 family and makes these movements more affordable.
Perhaps the most important element of the design of Cal. 32110 is its size At 25.6 mm diameter, it is exactly the same size as the ETA 2892/A2 and is a drop-in replacement for the Cal. 35111. Cal. 32110 will likely see use throughout IWC's range, replacing the ETA (and Sellita) based movements used previously.
- Calibre Family 32000, iwc.com