Watch Wiki

The Best Watches and Watch Brands

User Tools

Site Tools


three-quarter_plate

Three-quarter plate

Typical [[three-quarter plate]] in [[Glashütte]] style at the caliber [[Lange L901.0]] (click to enlarge!)
Typical three-quarter plate in Glashütte style at the caliber Lange L901.0
© Lange Uhren GmbH

A three-quarter plate (also ¾ plate) is a large top plate that covers roughly three quarters of the movement and is a historic signature of watchmakers in the Glashütte region of Germany.

Overview

Around 1864 Ferdinand Adolph Lange developed the legendary classical three-quarter plate caliber in Glashütte for pocket watches. The top plate covers about three-quarters of the movement, as seen from the reverse side of the dial. The barrel, crown wheel and the whole gear train are located under this large plate, complicating construction but increasing durability and stability. The bearing of the balance wheel and the anchor are exposed outside the plate and secured with a cock or bridge. To facilitate construction, the wheels and jewels are anchored using gold chatons that are attached after the plates are brought together.

Today the three-quarter plate is considered as special mark for quality Glashütte watches, but it is also commonly found in British and American pocket watches. Plates in Glashütte are traditionally made of untreated German silver and decorated with Glashütte ribbing. Compared to designs with several bridges, the three-quarter plate gives the movement significantly more stability. However, in watches with display casebacks, the large plate obscures much of the movement from view.

When A. Lange & Söhne relaunched in 1994, they were sure to showcase the three-quarter plate construction of their new movements, along with other signature Glashütte elements. Glashütte Original later returned to three-quarter plate designs, even with their automatic movements, and celebrates it with the Cal. GO 66, the three-quarter plate of which makes up the face of the PanoInverse. Although the Nomos 1 calibre did not use three-quarter plate construction, Nomos in-house movements have adopted a modification of the design, starting with the Nomos Alpha, with exposed barrel and winding components. Mühle-Glashütte introduced another Glashütte movement with a ¾ plate at Baselworld 2008.

three-quarter_plate.txt · Last modified: 03.07.2022 15:38 by 127.0.0.1

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki

© Watch Wiki. All texts are protected by copyright. The respective copyright holders are the signatories of the contributions. For details see Impressum. Regarding objections and complaints (copyright and other rights) also see there. Impressum | Privacy Policy | Copyright | About Watch Wiki